MODELS PT AND PBB

The model PBB Pivot Bearing Bracket and Model PT Pivot Bearing have been designed for use with other Dane components. The pivot bearing bracket is designed to accept the outer race of the pivot bearings and provide a convenient and secure means for clamping a pivot bearing up to 10.63 inches from its mounting surface. The pivot bearing provides a stable, accurate pivot and features ball bearings with double rows of balls. PT1 through PT6 are lubricated and sealed for life; PT0 is lubricated and shielded. A wide range of bearing shaft and side dimensions plus keyway specifications are available for unmatched versatility. CAD files are available.

Recommended Component Combinations Pivot Bearing  Bracket Pivot  Bearing Actuating  Lever PBB-1 PT1 & PT2 AL1-1 thru AL1-3 PBB-3 PT3 & PT4 AL3-1 thru AL3-3 PBB-5 PT5 & PT6 (Consult Factory)

Catalog  Number	A  Max.	Dia. B & D Std.  +.000 -.001  [+.00 -0.03]	*  C  Max.	Dia. E  +.000 -.001  [+.00 -0.03]	F	**  Keyway
PT0	0.96 [24.6]	.2500  [6.35]	0.96  [24.6]	.6250  [15.875]	.562  [14.27]	NONE
PT1	1.00 [25.4]	.3937 [10.00	1.00 [25.4]	.8661 [22.00]	.866 [22.00]	#204 WDF.
PT2	1.00 [25.4]	.3937 [10.00	1.00 [25.4]	.8661 [22.00]	.866 [22.00]	NONE
XPT1***	1.00 [25.4]	.3750  [9.53]	1.00  [25.4]	.8752  [22.230]	.938  [23.83]	#204 WDF.
XPT2***	1.00 [25.4]	.3750  [9.53]	1.00  [25.4]	.8752  [22.230]	.938  [23.83]	NONE
PT3	3.00 [76.2]	.6265  [15.91]	1.63  [41.3]	1.1811  [30.000]	1.531  [38.89]	.188 STD.
PT4	3.00 [76.2]	.6265  [15.91]	1.63  [41.3]	1.1811  [30.000]	1.531  [38.89]	NONE
PT5	2.00  [50.8]	.7465  [18.96]	1.75  [44.4]	1.5000  [38.100]	2.125  [53.98]	.188 STD.
PT6	2.00  [50.8]	.7465  [18.96]	1.75  [44.4]	1.5000  [38.100]	2.125  [53.98]	NONE

Specify:	1.	Catalog Number	EXAMPLE PT3-2-1.5-90 Indicates a model PT3 pivot bearing with a length "A" dimension of 2 inches and a length "C" dimension of 1.5 inches. Both have standard 3/16 inch keyways. The "A" keyway is rotated 90 degrees from "C"
	2.	Length, "A" dimension
	3.	Length, "C" dimension
	4.	Keyway Angle  (as applicable)	A 'right hand rule' is used for the angle. With fingers wrapped around either shaft and with the thumb pointing away from bearing housing, the fingers point in the direction of positive angle used for order number.

Catalog  Number	A  +.001 -.000  [+.03 -0.00]	B	C	D	E	F	G	Dia. H  +.005 -0  [+.13 -0]	X Min.  +/-.005  [+/-.13]	X Max  +/-.005  [+/-.13]
PBB-1	.866 [22.00]	1.00  [25.4]	.63  [15.9]	.75  [19.1]	1.50  [38.1]	3.25  [82.6]	2.50  [63.5]	.28  [7.1]	1.50  [38.1]	8.00  [203.2]
XPBB-1***	.875  [22.23]	1.00  [25.4]	.63  [15.9]	.75  [19.1	1.50  [38.1]	3.25  [82.6]	2.50  [63.5	.28  [7.1]	1.50  [38.1]	8.00  [203.2]
PBB-3	1.181  [30.00]	1.38  [34.9]	.63  [15.9]	1.25  [31.8]	2.25  [57.2]	4.25  [108.0]	3.25  [82.6]	.34  [8.7]	1.75  [44.5]	10.62  [269.9]
PBB-5	1.500  [38.10]	1.38  [34.9]	.63  [15.9]	1.25  [31.8]	2.25  [57.2]	4.25  [108.0]	3.25  [82.6]	.34  [8.7]	1.75  [44.5]	10.62  [269.9]

Return to R. D. Dane home page

Date last modified - April 10, 2006